Friday, 28 January 2011
Monday, 24 January 2011
Saturday, 22 January 2011
Friday, 14 January 2011
Monday, 10 January 2011
Thursday, 6 January 2011
more For sale
Compton corker, missing one breather hole surrounds and has 1cm split along seam where its come unstitched at rear of liner £20 SOLD
vintage bell star moto 3, needs a paint job and new foam £60 SOLD
end cans, some dents and scratches £25 SOLD
Wednesday, 5 January 2011
Parts for sale
bolt on side stand, never used £10 SOLD
maltese mirror in good condition £10 SOLD
70's 1" risers- could do with re-chroming £25 SOLD
shovel indicators, rear pair useable, front one has a bit broken but the bit is there so could be repaired if you need three indicators. chrome should clean up ok. £25
tear drop air filter cover and backing plate- good condition £40 SOLD
brass fuel tap
sportster 2 into 1 exhaust bracket £10
sportster shock bolt covers £2.50 SOLD
large diameter o ring pegs, only been used for mock up, great condition £30
german helmet, plastic with leather liner, £5
hex triumph oil tank, could do with re-chroming. 9"x 5" £60
slidding cam and retaining assembly for a shovel £30 SOLD
vintage jammer wideglide 41mm yokes, a few marks but very useable,15/16 stem
£100
highway hawk warbird tail light, couple marks on lense and the base chrome is not perfect, there is also a crack & a piece missing in the number plate lense
£100 SOLD
S&S super B carb, looks to be in great condition but i have never used it.
£100
FX headlight shell, top nut missing and a small nut and bolt from one of the rings is missing.
currently full of wiring blocks for shovel wiring £25 SOLD
12" shovel shocks, very used condition with flakey chrome £45
35mm forks, single lug for caliper, 7/8 yokes, needs full refurb, does not include lower axle clamps
£60 SOLD
sportster 16" rear wheel in ggod condition, came from a 2001, comes with avon roadrunner with 4mm of tread SOLD
19" single disc, with continetial 3.50 x 19 tyre 4mm of tread SOLD
Agv rc5, great condition hardly used, large, comes with oakley googles £30 SOLD
please email for more pictures & prices.
These will be going on ebay once i get some time.
Monday, 3 January 2011
project update- seat post
well it started like this, blocking the frame up and marking the cut area
cut made
new seat post with a sleeve for strength
new post test fitted, all good at this point
new post then trimmed to fit
nice amount of clearence
then it all goes wrong, i spot the faint line of a liner in the seat post casting, and decide the if i can get it out and run the seat post through the casting it will be a lot stronger than just welding underneath. unfortunately this means remaking the seat post and cut out.
another seat post made and liner now removed, i knocked the new seat post through the casting, only to find it would not line up with the old part of the seat post
after a lot of swearing i finally managed to get the to together, just needs welding now.
